Products

For your home, business, community of owners, agricultural or livestock operation, hotel complex or industrial warehouse, we offer the possibility of installing a photovoltaic system that takes advantage of the sun's energy to generate electricity in a sustainable way. This installation of Photovoltaic Panels can be configured with or without batteries, depending on your energy needs and objectives.

Photovoltaic Installation without Batteries:

This system consists of solar panels that capture solar energy and convert it into electricity that is immediately used to power your business. Unused energy is injected into the electrical grid, and your business can benefit from incentives or compensation for the excess energy you contribute to the grid.

Photovoltaic Installation with Batteries:

This system includes solar panels and a battery energy storage system. During the day, the panels generate electricity that can be used directly in your business while also charging the batteries. At night or on cloudy days, your business can continue to consume energy stored in the batteries, giving you greater energy independence and the ability to further reduce your dependence on the electrical grid.

With the option of photovoltaic installation with batteries, your business can be prepared to face power outages or emergency situations, providing greater stability and operational continuity.

Our team of experts will evaluate your specific needs and conduct a detailed study to determine which of these options is best suited for your business. The photovoltaic installation will not only save you on energy costs in the long term, but will also contribute to the protection of the environment and a more sustainable future.

So if you're interested in harnessing solar energy to power your business and reduce your carbon footprint, our PV installation options with and without batteries may be the perfect solution for you.

What is Solar Portability?

Solar Portability arises from the need of clients who have installed photovoltaic panels and want to make the most of the surpluses generated by their installation (all the energy that they do not directly consume themselves) and do not have a physical accumulation means to store them.

According to BOE 244 2019, Article 14 3 b establishes: In no case, the economic value of the excess hourly energy may be higher than the economic value of the hourly energy consumed from the network in the billing period.

In Solar Portability we will accumulate the economic value of the surpluses that are greater than the economic value of the hourly energy, that is, we do not accumulate the energy in kWh, but in euros.

The accumulated euros of the surpluses produced in said period that could not be compensated, will be accumulated in the Solar Portability Product to be applied in the form of a discount, in subsequent invoices of the client either at the same supply point in which it is located. associated with the installation or at any other different electricity supply point. Consult us and Tecnología Global will advise you and carry out all the procedures.

In the case of companies and businesses with industrial machines, in a high percentage of facilities, a part of the energy that enters the equipment or machinery is absorbed but ultimately not used. This unconsumed energy leaves the installation again and the electricity distributor penalizes this discharge, called reactive energy.

The penalty is applied each month to your electricity bill, and this can be avoided by installing a capacitor bank.

What is the reactive energy?

Reactive energy is that absorbed by some types of electrical equipment, such as industrial machinery of all types, elevators, fluorescent lighting, etc. Therefore, there is no consumption, instead an effort is generated for the system. electrical because it has to generate and transport that energy to the destination electrical equipment.

The main problem with reactive energy is that when we have contracted a power greater than 15Kw of power and the production of reactive energy exceeds that of active energy by 33%, (which is what we actually consume), the company will apply the corresponding penalty and according to how much reactive energy we have generated.

In short, the reactive energy in your installation can damage your equipment due to constant voltage drops.

What benefits will we obtain by installing a Capacitor Bank?

• We improve the quality of the electricity supply.
• Energy losses are reduced.
• We optimize the performance of the installation, helping to reduce phantom consumption (all the light consumption that occurs in a device plugged into the electrical network, even though it is not being used at that moment).
• Reduce the cost of the electricity bill.
• Stabilizes and improves the quality of the electrical supply, optimizing the sizing, capacity and performance of the electrical installation.
• We reduce reactive power, so that our installation suffers less overload and voltage drops are avoided.
• And finally, avoid penalties for reactive energy.

Where is it installed?

It is best to install it near the main switch of the installation, taking into account that it must be ventilated and free of dust or debris that could hinder or obstruct its correct operation.

How is the installation of capacitor banks carried out?

When capacitor banks are going to be installed, it is advisable to look at their physical location. Normally, the location is near the main switch of the installation, in a ventilated and dust-free area.

It is always connected to the main panel of the installation and complies with the Low Voltage regulations.

What profitability or savings will I obtain?

The capacitor bank is paid for with its own savings. That is to say, if we normally pay a high amount each month as a penalty for reactive energy, a capacitor bank comes at zero cost because we simply finance it based on the monthly savings that it generates once installed.

If in general terms a capacitor bank has a useful life between 12 and 15 years, it is usually amortized in only 15 or 18 months.

Contact us and from Global Technology we will advise you and give you the best solution.

What benefits does LED have?

Savings: the main benefit of LED lights is savings. They are much less expensive than traditional light bulbs because they consume up to 85% less. It is a great saving on the electricity bill at the end of each month.

Duration: the useful life of LED lights is longer than that of traditional lamps.

The best option to save...

With a service life of approximately 50,000 operating hours – in the outdoor luminaire segment, many times even much longer – the LED is superior to most light sources. This translates into 5.7 years of permanent service or 2,083 days 24 hours a day. The lifespan of an LED depends on, among other things, temperature, current and voltage, humidity, chemicals, radiation and mechanical forces.

What are the characteristics of LED lamps?

LED lamps save a lot of energy. They do not emit ultraviolet or infrared emissions and therefore do not produce light pollution. Both its components, being 99% recyclable, and the fact that it does not have mercury, result in them being the best option for environmental protection.

LED lighting, in addition to the savings it generates at the point of supply, offers a wide selection of colors and tones, so that your client's business has the best lighting quality. These efficiency equipment have practically zero maintenance, which represents another important savings measure for the user.

Our proposal:

We analyze your bill in relation to energy consumption by traditional or fluorescent lighting and we prepare a proposal with LED lighting for your business, warehouse, residential complex, hotel installation, parking, etc...

We calculate your monthly savings and the profitability of the change.

If you pay a monthly rental for your meter, why not own it for an equal or even lower price?

Our telemetry meters have the latest technology in consumption measurement tools.

They will allow you to have total control of your installation, to be able to prepare a consumption profile, analyze it, thus being able to adapt it comfortably and save month by month.

Furthermore, as an authorized distributor, you will have access to exclusive software that will allow you to see if there is a penalty for reactive energy, monitor the quality of the supply, etc. comprehensively and proactively.

“What is not measured can not be improved”

Each installation is unique and we carry out a personalized study so that you can recharge in the most practical, safe and efficient way possible, be it in a private garage, in a space within a community garage, public road or parking, etc.

Together with national reference suppliers, we put at your disposal a wide assortment of chargers of different models depending on the charging point, to offer you the one that best suits your needs.